ASIO4ALL vs. WASAPI for Windows recording and playback
Some Windows audio apps offer both ASIO and WASAPI. ASIO4ALL supplies an ASIO driver option for compatible WDM devices. WASAPI is the Windows Audio Session API, and the host must offer a WASAPI mode for you to select it. The choice affects how the app opens the endpoint and shares it with other software.

In this guide
ASIO4ALL vs WASAPI: the short answer
Use ASIO4ALL when your Windows audio app only offers ASIO and your device has no ASIO driver of its own. Use WASAPI when your host offers it and you want Windows to handle the device, either in shared mode so other apps keep playing, or in exclusive mode so one app has the endpoint to itself. The ASIO4ALL vs WASAPI choice mostly comes down to what your host supports and whether other software needs the same device at the same time.
ASIO4ALL supplies an ASIO driver option, listed as ASIO4ALL v2, for compatible WDM devices. WASAPI is the Windows Audio Session API, and the host must offer a WASAPI mode for you to select it. Both reach the same hardware, but they open and share the endpoint in different ways.
Note: Neither name tells you how a particular session will feel. Low delay depends on the host, the audio driver and the hardware together, so a short test on your own system is the reliable way to decide.
How ASIO4ALL and WASAPI reach your device
Both paths end at the same Windows audio driver for your device. The difference is the layer the DAW talks to and how much of the Windows audio system sits in between.
ASIO4ALL
ASIO4ALL is a universal ASIO driver by Michael Tippach. It works on top of the existing WDM drivers and presents compatible endpoints to ASIO hosts. The current release is 2.22, and it officially supports Windows 10 and Windows 11, including native ARM64 and ARM64EC support on Windows on Arm.
Because ASIO hosts are common in music software, ASIO4ALL is often the only way to use built-in laptop audio or a basic USB device in a host that does not offer anything else.
WASAPI
WASAPI is Microsoft's own audio interface built into Windows. A host that supports it can open an endpoint in one of two modes, shared or exclusive, and the mode changes how the device is shared with other software. Some hosts, including REAPER on Windows, offer WASAPI as an audio system next to ASIO.
ASIO4ALL vs WASAPI compared
The table below sums up the practical differences. It describes general behavior, and your host's documentation is the final word on what it supports.
| Aspect | ASIO4ALL v2 | WASAPI shared | WASAPI exclusive |
|---|---|---|---|
| Host requirement | Host supports ASIO | Host offers WASAPI shared | Host offers WASAPI exclusive |
| Other apps on same device | Depends on device and settings | Can play at the same time | Usually blocked while in use |
| Format control | Set by the host and ASIO4ALL panel | Tied to the Windows shared format | Requested by the app, if the device supports it |
| Buffer control | ASIO4ALL panel buffer setting | Depends on host and Windows | Depends on host and device |
| Typical use | ASIO-only DAWs without a vendor driver | Listening alongside other apps | Focused recording or listening in one app |
If your device does have a manufacturer ASIO driver, there is a third option to consider. Our ASIO4ALL vs native ASIO guide covers that comparison.
Latency, buffers and sample rate
Windows supports low-period streams in shared mode on compatible configurations. ASIO4ALL's effective latency also depends on the selected device, settings and processing, so the names alone give you little information about how a particular session will feel.
Buffer maths you can use
For any mode that reports a buffer in samples, divide samples by the sample rate and multiply by 1000 to get milliseconds. At 48 kHz, 128 samples is about 2.7 ms, 256 about 5.3 ms and 512 about 10.7 ms. At 44.1 kHz, 256 samples is about 5.8 ms. Round-trip delay adds input and output buffering plus whatever the driver and hardware add.
The buffer size guide explains how to find a stable value in the ASIO4ALL panel. Sample rate matters too: keep the project, the host and the device on the same rate where possible, as explained in our ASIO4ALL sample rate guide.
Watch out: A lower buffer only helps if playback stays clean under your normal plugin load. Clicks, crackles and dropouts at a small buffer are a sign to step up, not a sign that one mode is broken.
Start with the modes your host and hardware support
For an ASIO-only workflow without a model-specific ASIO driver, try ASIO4ALL with a single working input and output. Choose WASAPI shared mode when simultaneous playback from other apps matters. Try exclusive mode when your app supports it and your recording or listening workflow works with one app controlling the device.
Typical choices by user
- Producer on laptop speakers in an ASIO-only DAW: ASIO4ALL v2.
- Podcaster editing while a call app stays open: WASAPI shared, if the host offers it.
- Focused recording in a host with WASAPI exclusive: try exclusive mode and compare with ASIO4ALL.
- Interface with its own ASIO driver: start with that driver, then compare.
Where the setting lives
In REAPER the audio system is chosen under Options › Preferences › Audio › Device; the REAPER User Guide describes the options. FL Studio uses Options › Audio settings, Ableton Live uses Options › Settings › Audio and Cubase uses Studio › Studio Setup › Audio System. Which modes appear depends on the host and version. REAPER users can follow our ASIO4ALL in REAPER guide.
Run a practical check on the same session
Keep the output device, test clip and sample rate consistent so the only thing that changes is the mode. Save a copy of the project first, because device and channel names may differ between ASIO4ALL and WASAPI.
- Pick one output device and one input, and set the same sample rate in the host for every test.
- Select ASIO4ALL v2, enable the device in its panel and note which inputs and outputs appear.
- Play the clip for a few minutes and record a short passage if capture matters.
- Repeat the check with the browser or chat app you normally keep open.
- Switch to WASAPI shared, then exclusive if offered, and repeat steps 2 to 4.
- Listen for dropouts and confirm you can return to the previous configuration before relying on the new one.
Note the reported latency and any problems for each mode. The best option is the one that stays clean with your real project and still lets the rest of your workflow run.
Reading the results
If ASIO4ALL plays cleanly but other apps go quiet, try pausing host audio from the tray when you need the device, or compare with WASAPI shared mode. If WASAPI shared mode works but the host reports a format mismatch, check that the project sample rate matches the device format set in Windows.
If every mode crackles at the same buffer, the cause is more likely the project load or the system than the driver choice. Raise the buffer one step, test again, and work through our crackling and dropouts guide before deciding. A mode that is slightly slower on paper but never drops out is usually the better one for real recording.
Frequently asked questions
Not automatically. Low delay depends on the host, driver and hardware together. Compare the latency your host reports and test both at the same sample rate and a stable buffer.
In WASAPI exclusive mode one app opens the endpoint for itself. Close or release the exclusive stream, then check shared playback again.
Only if the host offers a WASAPI mode. Some hosts, including REAPER on Windows, do. In an ASIO-only host without a vendor driver, ASIO4ALL is the usual option.
No. ASIO4ALL works on top of the existing WDM driver and presents the device to ASIO hosts. WASAPI uses the same underlying driver through Windows' own audio API.


