Setup

How to Install ASIO4ALL on Windows 10 and 11

An ASIO4ALL installation is complete when your DAW can play through the intended audio device. Use this sequence to go from the publisher’s Windows installer to a verified playback path without changing your everyday sound settings.

Windows laptop on clean home studio desk, connected compact USB audio interface and headphones, installation preparation
In this guide

How to install ASIO4ALL in brief

To install ASIO4ALL, download ASIO4ALL_2_22.exe from asio4all.org, close your DAW, run the installer, then reopen the DAW and select ASIO4ALL v2 as the audio device. Enable one output in the ASIO4ALL control panel and play a test clip. The installation is complete only when you hear that clip through the device you intended.

That last point matters. Running the installer is the easy part. The real work is making sure your DAW, the ASIO layer and the Windows WDM driver underneath all agree on which device to use, at which sample rate and with which buffer.

This guide follows the order recommended in the publisher's setup manual: check Windows, install, select the driver in your host, configure the device list, then verify playback and recording separately. It does not touch your everyday Windows sound settings, so your browser and media players keep working as before.

The steps suit home producers, podcasters and musicians working with onboard audio, a USB headset, a USB microphone or a class-compliant interface. Set aside a quiet quarter of an hour, keep a pair of headphones at hand, and have a short known audio clip ready for testing.

Check the computer and audio device first

The publisher lists Windows 10 as the minimum for the current installer and officially supports Windows 10 and Windows 11 for version 2.22. You also need a Windows audio device that works with its existing WDM driver and an application that can select an ASIO driver.

Run a quick Windows sound test

A Windows audio settings test gives you a quick way to check for working output before you bring the DAW into the picture. Open the sound settings, pick your headphones, speakers or interface as the output and play a test sound. If you plan to record, speak into the microphone and watch the input level move.

  • If Windows plays and records correctly, ASIO4ALL has a working endpoint to build on.
  • If the device is missing in Windows, fix the cable, USB port or manufacturer driver first.
  • If several outputs appear for the same hardware, such as a monitor connected over HDMI, note the exact name of the one you want.

Note your current setup

Close your recording software before running the installer. If you already have a working interface driver, write down its name and active channels in the DAW so you can restore your session's original routing after comparing options.

Note: ASIO4ALL is Windows only and does not replace a good manufacturer ASIO driver. If your interface ships with its own ASIO driver, compare the two before settling on one. ASIO4ALL is most helpful for onboard audio, USB headsets and USB microphones.

Download and run the ASIO4ALL installer

Get the Windows installer from the publisher's download page and follow its prompts. The current file is ASIO4ALL_2_22.exe, released on July 23, 2026. Our ASIO4ALL download guide explains how to confirm you have the genuine file and what changed in recent versions.

  1. Save any open projects and close your DAW and other audio applications.
  2. Download the installer from asio4all.org and check that the file name matches the release page.
  3. Double-click the file and approve the Windows administrator prompt, since you are installing a driver.
  4. Read each setup screen and accept the prompts to finish installation.
  5. Open the DAW after the installer finishes so the application can enumerate the available drivers.

Watch out: Only install the driver from asio4all.org. Bundled or repackaged copies from download mirrors cannot be matched against the publisher's release notes, and the publisher restricts redistribution of the software.

A restart of Windows is not normally part of the sequence, but if your DAW does not list the new driver after reopening it, restarting the computer is a harmless next step.

Select ASIO4ALL v2 in your DAW

Once you install ASIO4ALL, every ASIO-capable host on the computer can see it. The driver always appears under the name ASIO4ALL v2, regardless of the release number you installed.

  1. Open the DAW's audio settings and choose ASIO as the driver type or audio system where the application exposes that choice.
  2. Select ASIO4ALL v2 from the list of drivers.
  3. Open its control panel from the host's hardware setup or ASIO panel button.
Where to select the ASIO driver in common Windows DAWs
DAWAudio settings path
FL StudioOptions › Audio settings
Ableton LiveOptions › Settings › Audio (Preferences in older versions)
CubaseStudio › Studio Setup › Audio System
REAPEROptions › Preferences › Audio › Device

When a host initializes the driver, the publisher's manual notes that an ASIO4ALL icon appears in the Windows system tray. Seeing that icon is a useful sign that the DAW has actually loaded the driver rather than just listing it.

Configure the WDM device list

The ASIO4ALL control panel shows the audio hardware Windows knows about. The publisher documents it as the WDM Device List. Each entry represents a device, and within it the individual inputs and outputs that ASIO4ALL can pass to your DAW.

Start with one device

Activate the device connected to your headphones or speakers. Enable only the input and output you need for the first test. Leaving several unused devices active makes it harder to tell where a problem comes from, and it can increase the load on the system.

Set a sensible buffer

The buffer size controls how much audio is processed in each block. Divide samples by the sample rate and multiply by 1,000 to get milliseconds. At 48 kHz, 256 samples is about 5.3 ms; at 44.1 kHz, it is about 5.8 ms. That is a comfortable starting point for most computers.

Match the sample rate

Set the project sample rate in your DAW to a rate the device handles comfortably, usually 44.1 kHz or 48 kHz. Where you can, keep the format chosen for the device in Windows at the same rate. A mismatch between the two is a common reason for silence, pitch problems or a device that refuses to start, and it is far easier to rule out now than in the middle of a session.

Tip: Leave the advanced options alone during installation. Get clean playback at a moderate buffer first, then fine-tune. Our ASIO4ALL buffer size guide explains how to lower latency step by step.

Verify playback and recording separately

Start a blank project and play a short audio clip at a low listening level. Check the master meter and make sure the master bus is assigned to the active output pair. Only when playback is confirmed should you move on to recording.

Test the input

With playback confirmed, choose the physical input on a new track and look for movement on its meter. Speak or play into the microphone or instrument. If the meter moves, the input path through ASIO4ALL is working; record a few seconds and play them back to be sure.

If sound stops after switching driver

If sound stops when you switch driver, reopen the panel and inspect the device status. An unavailable endpoint can be held by another application. Close applications that use that endpoint, then reinitialize your DAW's audio system or restart the DAW and test again.

  • Meter moves but no sound: the master output is probably mapped to a pair that is not enabled in the panel.
  • Device shown as unavailable: another program, often a browser or call app, may be using it.
  • Driver missing from the list: confirm the host supports ASIO and that ASIO is selected as the driver type.

For a deeper sequence of checks, see ASIO4ALL not working or, if the problem is silence alone, our guide to fixing no sound.

Keep a record of the working setup

Note the driver name, output pair, sample rate and buffer size beside the project. This gives you a repeatable starting point if you switch between laptop speakers and an interface. It also makes troubleshooting much faster if something changes after a Windows or DAW update.

Example of a simple setup record to keep with your projects
SettingWhat to write down
DriverASIO4ALL v2 and the installed release, for example 2.22
DeviceThe exact endpoint name shown in Windows
Output pairThe outputs assigned to the master bus
Sample rate44.1 kHz or 48 kHz, matching the project
Buffer sizeThe last setting that played cleanly

If playback is stable but live monitoring feels delayed, assess the buffer in small steps before adjusting advanced settings. Lower it one step, play the same passage, and stop at the last setting that stays free of clicks.

Frequently asked questions

Usually not. Close the DAW before installing and reopen it afterwards so it can enumerate the new driver. If ASIO4ALL v2 still does not appear, a restart is a simple next step.

No. ASIO4ALL works on top of the existing WDM drivers and is only used by programs that select it. While a DAW holds a device through ASIO4ALL, however, other apps may not be able to use that same device at the same time.

Version 2.22 officially supports Windows 10 and Windows 11, and the publisher lists Windows 10 as the minimum for the current installer. Version 2.22 also adds native support for Windows on Arm.

The driver keeps the name ASIO4ALL v2 in hosts across releases. The release number, such as 2.22, refers to the installer version, not the name the DAW displays.

Sources and further reading

ASIO4ALL Editorial Team

We write expert, hands-on guides for Windows musicians, podcasters and producers. Driver facts are checked against the publisher's manual and release notes; DAW steps against each vendor's documentation.